篇一:机械英语
英语翻译
注意:机械英语
机器静止期(可能会有专业名称)
run out time指停机后要一段时间才可处理相関物料.
篇二:机械英语
机械英语翻译：The springs are Century die compression springs
弹簧为Century牌铸造压缩弹簧
这里的Century应该是个牌,如果没有固定的中文翻译,可以保留原英文名字
若要翻译,可译为“世纪”【机械英语】
篇三:机械英语
机械工程科技英语翻译，要机械工程科技英语的专业词汇，文章如下“机器是执行机械运动的装置，用来变换或传动能量，物料，信息。凡将其他形式能量变换为机械能的机器称为原动机，如内燃机，将热能变换为机械能，电动机将电能变换为机械能，它们都是原动机。凡利用机械能去变换或传递能量，物料，信息的机器称为工作机，如发电机，起重机等。
”
Machine is an apparatus used to transform or transmit energy, material and information. There are basically two kinds of machines.One is the machine that tranforms other forms of energy into mechanical energy, which is called the prime mover, such as internal-combustion engine, changing heat energy into mechanical energy; and electromotor, which turns electicity into mechanical energy. The other is called working machine, which uses mechanical energy to tranform or transmit energy,material and information, such as generator, crane and so on.
篇四:机械英语
机械制造与自动化 英语简介
machinofacture and automation
brief introduction in English
篇五:机械英语
机械英语翻译
一、测量项目：
1、螺栓跨距及对角测量；
2、螺栓顶端高度的测量；
3、螺栓垂直度的测量；
上述三项经检验,基本符合图纸要求.（附检验记录）
二、备注：
1、仪表座已装上,有效的起到了定位作用,即对螺栓跨度螺栓螺栓之间的相对位置的固定有很好的作用；
2、为保证正确浇注,在浇注过程中要做到实时监控,具体方法为及时、多次测量预埋件尺寸；
3、地脚螺栓的固定：
1）与螺栓直接相连的地方不允许焊接,以免螺杆产生变形；
2）焊接垫板时,需使用全焊接；
3）浇注时之前,确定螺栓的所有螺帽是否是拧紧状态.
1. Measurement items:
1). Screw bolt span and opposite angle
2). Top height of screw bolt
3). Verticality of screw bolt
Above 3 items pass the inspection according to drawing. (see attached inspection record)
2. Remark:
1). The instrument has been mounted and functions effectively to fix the position between bolts.
2). To ensure correct casting, real time monitoring is needed in casting process by multiple and timely measurement for embedded part.
3). Fixation of foundation bolt.
i. Welding at the place connected directly with bolt is not allowed to avoid screw deformation.
ii. Full welding is needed for base plate.
iii. Make sure all screw nuts are locked tightly before casting.
篇六:机械英语
农机 就是农业机械 用英语怎么说
我想知道 农机 就是 农业机械 怎么用英语说
agricultural machinery
篇七:机械英语
机械英语书籍推荐【机械英语】
Shigley’s Mechanical Engineering Design,
Mechanical Engineering Handbook,by Frank Kreith
Problems and Solutions in Mechanical Engineering,by U.K.Singh
Automotive Engineering Fundmentals,by Richard Stone,Jeffrey K.Ball
这些书籍都是PEC机械工程英语认证（Mechanical Engineering English Certification）的考试指导用书,应该算是最好的了.
篇八:机械英语
机械英语COMM是什么的缩写
comm.
1 commander
2 commentary
3 commerce
4 commission; commissioner
5 committee
6 commonwealth
7 communication
篇九:机械英语
求助:机械类英文高手请进!
有两句话需要翻译
请帮忙翻译,文本如下:
补充说明
将电源开关HK放到接通位置,压下脚踏开关1QA,电机正转,工作盘向重弯曲方向转动；（即工作盘正向转动）
当压下脚踏开关2QA,电机反转,工作盘无负荷反转；
在电机运转中,需要停止间断工作,按下停止按TA,电机停转.其它操作参照说明书第10页（六）电气设备和电动机的操作说明.
switch the power switch HK to turn-on position,depress the foot switch 1QA,the motore will turn in positive rotation,the working plate will turn towards the weight bend direction(working plate turning in positive rotation)
depress the foot switch 2QA,motor will reverse,working plate will reverse with free load.
if halt is required during running of motor,depress stop button TA,motor will stop.other operations refer to instruction in page 10 (6) electric equipment and electric motor instruction
篇十:机械英语
机械用的“传动”用哪个英文单词表示最适合?
传动 transmission
传动装置 transmission gear
皮带传动 belt transmission
链条传动 chain transmission
齿轮传动 gear transmission
无级传动 stepless transmission
液压蓄能传动 hydrostatic stored energy transmission
http://m.tuzhexing.com/gaokao/1297520/